Wholesale China Cooker Hood Manufacturers Suppliers - High End Designed Angled Hood 708C – ARCAIR

Performance

High-end designed Angled wall mount cooker hood in 90cm With special shape SS panel design full with artistic atmosphere to match with black glass make your kitchen with higher level.

90cm size only suit for large kitchen and with big suction power motor to qulckly clears the air and remove the ordo in the kitchen to keep fresh air and healthy of your families.

With the angled cooker hood, you can look almost vertically at your cooking dishes, and will not bump your head against the appliance.

Low noise level –even at the max power speed only like a dinnertime chat with family Electronic switch with 3 speeds power level control to meet different cooking need. Also, stainsteel electronic button match SS panel well & easy to operate.

The telescopic chimney 400+400MM can be individually adapted to your installation needs 5 layers aluminum filter capture the grease well and easy to clean by dishwasher. After long time use, low cost and easy to replace a new one.

Operating Mode

With good choice between recirculation or direct air exhausting for you:

1. Recirculating mode: Charcoal filters are necessary if your area is not allowed to install outdoor exhaust pipe.Replaced every 2 to 4 months depending on using frequency. Charcoal filter offered by us and our dealers,pls contact with right model no. and motor information to get right charcoal filter as different model and motor will match with different one.

2. Direct air exhausting mode: Used as a ducting vent cooker hood with a duct pipe 150mm in diameter. Our product included 1.5M or 2M pipe, you also can easily to buy from shops if you need to replace but only find the right diameter.

Energy-Saving Light

2* 1.5W LED light installed under the range cooker bottom and to bright enough with the cooking area,also as the lighting in the dark while not cooking. Long use life time—keep working over 30.000 hours